ISDNAUDIO.COM Discussion and help forum

ISDNAUDIO.COM Discussion and help forum
http://www.forum.isdnaudio.com/yabb2-cgi/YaBB.cgi General >> Techical support >> Telos Zephyr compatable to cdq prima 220? http://www.forum.isdnaudio.com/yabb2-cgi/YaBB.cgi?num=1101454539 Message started by dino on Nov 26^th, 2004 at 7:35am

Title: Telos Zephyr compatable to cdq prima 220?
Post by dino on Nov 26^th, 2004 at 7:35am

Hi Is there anyone who can advise if Telos Zephyr is compatable with CDQ Prima 220
And how do I change the setting to be able to dial up to it
Thanks
Dino

Title: Re: Telos Zephyr compatable to cdq prima 220?
Post by Edwin van den Oosterkamp on Nov 29^th, 2004 at 11:18am

The Telos Zephyr and the CDQ Prima both have modes that are compatible with each other. You also need to set both codecs up to use a similar audio mode (type of compression, samplerate, mono/stereo).

On the Prima you need to ensure that the decoder is not in "dependent mode". You do can change this in the "decoder" menu by setting option "dep mode" to "no".

If I remember correctly then on the Zephyr you need to set the mux mode to "prima" or "ccs".

I do not have a manual for the Zephyr at hand, but if I am not misstaken there is a sheet at the back showing the correct settings for making a successful call with a Prima.

Title: Re: Telos Zephyr compatable to cdq prima 220?
Post by porknbeanz55 on Dec 27^th, 2005 at 7:29pm

Does this apply to the Prima 110 & Zephyr as well?

Title: Re: Telos Zephyr compatable to cdq prima 220?
Post by Edwin van den Oosterkamp on Jan 4^th, 2006 at 10:43am

Yes, this applies to all CDQ Prima versions.

Title: Re: Telos Zephyr compatable to cdq prima 220?
Post by Rolf Taylor on Apr 14^th, 2006 at 9:39pm

See Ap Note Titled "Making a CCS Prima "Zephyr-compatible" here:

http://www.telos-systems.com/support/csb.htm

Best regards