Apr 11th, 2025 at 12:09pm
  
  Welcome, Guest. Please Login or Register
 YaBB - Yet another Bulletin Board
  YaBB is sponsored by XIMinc!
 
  Home Our Website HelpSearchLoginRegister  
 
 
  ISDNAUDIO.COM Discussion and help forum › General › Techical support › Zephyr not framing on cdq Prima Codecs
(Moderators: Edwin van den Oosterkamp, Mo-ISDNAUDIO.COM)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Print
Zephyr not framing on cdq Prima Codecs (Read 9338 times)
May 24th, 2004 at 3:47pm

From the old message board   Offline
YaBB Newbies

Posts: 11
 *
 
Trying to connect from S.Africa to UK from a Telos Zephyr to a CDQ Prima codec and got as far as the Zephyr hearing and locking with the Prima but the Prima not hearing us and also not framing.

Is the problem with the Prima and how can one fix it?Settings, L2 Mono TX and RX, 48 Khz and 64 Kbps HELLLLLLP ?
 
Back to top 
IP Logged
 
Reply #1 - May 24th, 2004 at 3:48pm

Edwin van den Oosterkamp   Offline
YaBB Administrator
I love ISDNAudio.COM!

Posts: 42
 *****
 
The problem is most likely that the CDQ Prima is set in “decoder dependent” mode – in this mode it is not compatible with the Telos unit.

To set the Prima in the Telos compatible “independent mode”, go into the “Decoder->Indep” menu and set it to “yes”. The settings of the decoder should then still match the encoder.

 
Back to top 
IP Logged
 
Page Index Toggle Pages: 1
Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

ISDNAUDIO.COM Discussion and help forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge