Hi all,

I think I may have a problem in the way I set up my system for professional voiceover(this is what my wife does).  I'm currently running the Demo version of AudioTx, so I hope I can get it straightened out before it expires.  If everything works fine I'll buy it.

I ran a test recently with a "local" voiceover studio.  They could hear my wife fine but she could't hear them (talkback).  They also said they heard what they thought was some feedback as she spoke.

Here is my setup:

I'm running AudioTx on a Windows XP PC with a Diva PCI ISDN card & an  M-Audio AUDIOPHILE 2496 SOUNDCARD.  I also use a ART MicroMix Mic Preamp.

I have the mic connected to the pre-amp input.  The mic pre-amp output is connected to the soundcard Input.

I have the headphones connected to the outputs of the soundcard via the headphone cable - this seems like a straightforward setup to me.   

** When I ran a test by just dialing up our isdn line with our house phone - the talkback worked fine - I could hear her & she could hear me through AudioTx.

Could there be some setting I need to change in AudioTx or the soundcard?  I did adjust the gain on the preamp a bit but still got some feedback.

Any Thoughts?

As always, thanks for your help.
Mike

Hi Edwin,

Thanks for getting back to me.

The problem with not being able to hear "talkback" from the other end was a bad headphone extension cable.  Once I replaced the cable, the talkback came through loud and clear.

The issue with feedback was probably the setting on the soundcard mixer.  I unchecked one of the settings.  In any case it went away during further testing.

Thanks again for youre help.
Mike