I do a daily Radio origination from our office to a Radio Station in Pasadena, CA, and are using the Telos Zephyr to dial into the Stations Zephyr. We are wanting to do a couple of Hour Long Remotes in the Middle of nowwhere, and to that end, wanted to use a Inmarsat B SatPhone that has a EIA 530 HSD port on it. I have been reading that ISDN channels are similar to the HSD channels available on the Inmarsat B network.

My question is this, If I can hookup the Zephyr to the SatPhone's EIA-530 port, can I dial the Stations ISDN number to Sync the Zephyrs together and go on the air with decent audio???

Any and I mean ANY help would really be appreicated

Hey.. thanks for getting back to me, Finally I have a real user.. I have a 25 Pin RS-530 Port on the SAT terminal for HSD. How do I interface the V.35 into a 25 pin "Centronics" port.

Also to get the bandwith, I have been told that I need to run out of the Telos into a Scotty i-sync that will split the feed into two 64K channels, and using two Inmarsat b terminals lockup with the Radio Station.  What was your setup and workflow

Thanks So Much

Steve